Pelco Home Security System X1431SM B 7 09 User Manual

M A I N T E N A N C E / S E R V I C E  
EH5700 Series  
Environmental Enclosure  
C1431SM-B (7/09)  
 
Contents  
List of Illustrations  
List of Tables  
C1431SM-B (7/09)  
3
 
Important Safety Instructions  
Installation and servicing should be done only by qualified service personnel and conform to all local codes.  
Unless the unit is specifically marked as a NEMA Type 3, 3R, 3S, 4, 4X, 6, or 6P enclosure, it is designed for indoor use only and it must not be  
installed where exposed to rain and moisture.  
Only use replacement parts recommended by Pelco.  
After replacement/repair of this unit’s electrical components, conduct a resistance measurement between line and exposed parts to verify the  
exposed parts have not been connected to line circuitry.  
The installation method and materials should be capable of supporting four times the weight of the enclosure, pan/tilt, camera and lens  
combination.  
The product and/or manual may bear the following marks:  
This symbol indicates that dangerous voltage constituting a risk of electric shock is  
present within this unit.  
CAUTION:  
RISK OF ELECTRIC SHOCK.  
DO NOT OPEN.  
This symbol indicates that there are important operating and maintenance instructions  
in the literature accompanying this unit.  
To reduce the risk of electrical shock, do not remove cover. No user serviceable parts  
inside. Refer servicing to qualified service personel.  
4
C1431SM-B (7/09)  
 
 
Description  
Environmental enclosures in the EH5700 Series are used with Pelco’s pan/tilt units of fixed mounts. Environmental enclosures in the  
EH5700L Legacy Series are used with Pelcos PT780 Series pan/tilt unit.  
MODELS  
EH5700 SERIES  
EH5723  
Environmental enclosure with rear-opening lid. Lid has gas spring to hold it open. 23-inch (58.42 cm) length.  
EH5723-1  
EH5723-2  
EH5723-3  
EH5729  
EH5723 with 120 VAC thermostatically controlled heater and blower.  
EH5723 with 24 VAC thermostatically controlled heater and blower.  
EH5723 with 230 VAC thermostatically controlled heater and blower.  
Environmental enclosure with rear-opening lid. Lid has gas spring to hold it open. 29-inch (73.66 cm) length.  
EH5729 with 120 VAC thermostatically controlled heater and blower.  
EH5729 with 24 VAC thermostatically controlled heater and blower.  
EH5729 with 230 VAC thermostatically controlled heater and blower.  
EH5729-1  
EH5729-2  
EH5729-3  
EH5700L LEGACY SERIES  
EH5723L  
Environmental enclosure with rear-opening lid. Lid has gas spring to hold it open. 23-inch (58.42 cm) length. Obsolete.  
EH5723L-1  
EH5723L-2  
EH5723L-3  
EH5729L  
EH5723L with 120 VAC thermostatically controlled heater and blower.  
EH5723L with 24 VAC thermostatically controlled heater and blower.  
EH5723L with 230 VAC thermostatically controlled heater and blower.  
Environmental enclosure with rear-opening lid. Lid has gas spring to hold it open. 29-inch (73.66 cm) length. Obsolete.  
EH5729L with 120 VAC thermostatically controlled heater and blower. Obsolete.  
EH5729L with 24 VAC thermostatically controlled heater and blower. Obsolete.  
EH5729L with 230 VAC thermostatically controlled heater and blower. Obsolete.  
EH5729L-1  
EH5729L-2  
EH5729L-3  
C1431SM-B (7/09)  
5
 
   
OPTIONAL ACCESSORIES  
BK57-1  
Blower kit, 120 VAC, 15 watts  
BK57-2  
Blower kit, 24 VAC, 10 watts  
BK57-3  
Blower kit, 230 VAC, 15 watts  
HK57-1  
Heater kit, 120 VAC, 90 watts  
HK57-2  
Heater kit, 24 VAC, 50 watts  
HK57-3  
Heater kit, 230 VAC, 70 watts  
O/I-LPP  
Preset position lens wire harness (must be used with O/I-PCB)  
120 VAC electrical outlet (must be used with O/I-PCB)  
Circuit board with thermostats  
O/I OUTLET  
O/I-PCB  
SS5723  
Sun shroud for EH5723 Series enclosures  
SS5729  
Sun shroud for EH5729 Series enclosures  
TI57  
Thermal insulation kit for EH5723 and EH5729 Series enclosures  
Window defroster and defogger kit, 120 VAC, 30 watts  
Window defroster and defogger kit, 230 VAC, 30 watts  
Window defroster and defogger kit, 24 VAC, 30 watts  
Window wiper kit, 120 VAC, 15 watts, EH5723 Series enclosures  
Window wiper kit, 24 VAC, 15 watts, EH5723 Series enclosures  
Window wiper kit, 230 VAC, 15 watts, EH5723 Series enclosures  
Window wiper kit, 120 VAC, 15 watts, EH5729 Series enclosures  
Window wiper kit, 24 VAC, 15 watts, EH5729 Series enclosures  
Window wiper kit, 230 VAC, 15 watts, EH5729 Series enclosures  
WD57-1  
WD57-3  
WD57-2  
WW5723-1  
WW5723-2  
WW5723-3  
WW5729-1  
WW5729-2  
WW5729-3  
6
C1431SM-B (7/09)  
 
 
Maintenance  
Perform the following maintenance at regularly scheduled intervals to prolong the operational life and appearance of the equipment.  
1. Clean the window with a mild non-abrasive detergent in water and a soft cloth to maintain picture clarity.  
2. If your enclosure has a blower, clean the foam filters as follows:  
a. On the bottom front of the enclosure, remove the two screws in the vent grill.  
b. Remove the vent grill and take out the filters.  
c. Clean the filters with warm water and mild detergent, dry thoroughly, and replace them in the grill.  
d. Reinstall the vent grill.  
To order replacement filters, use the part number EH550010045.  
C1431SM-B (7/09)  
7
 
 
Exploded Assembly Drawings  
F
K
14  
A
E
15  
11  
10  
J
12  
B
TO STUD INSERTS  
A
D
IN LID  
13  
9
16  
8
24  
7
A
E
6
TO UPPER WINDOW  
BRACKET NUTS  
F
19  
G
22  
L
5
H
C
20  
18  
21  
B
17  
A
A
M
25  
4
1
A
B
26  
27  
3
28  
A
B
2
23  
29  
B
SCREWS  
SUPPLIED  
WITH VENT  
COVER  
30  
PLATE  
INTERNALLY MOUNTED TO REAR OF HOUSING  
ON BASIC UNIT. BASIC UNITS COME WITH VENT  
COVER PLATES INSTALLED. -1, -2, AND -3 UNITS  
COME WITH #30 AND #23 INSTALLED.  
Figure 1. EH5700 Exploded Assembly Diagram  
8
C1431SM-B (7/09)  
 
   
Table A. EH5700 Series Exploded Assembly Parts List  
Item  
Qty  
Description  
Part Number  
1
2
3
4
2
2
2
2
Gland Nut  
Vent Cover Plate  
Vent Cover Gasket  
Label  
HF00-1352-3500  
57004000COMP  
570010001  
LBLG10010  
5
6
1
1
Hole Plug, 3/8-inch Hard Nylon, Black  
Pivot Pin  
ZH3091  
570010000  
7
8
1
2
Body Hinge  
Clip  
57004004COMP  
125010001  
9
1
1
1
2
1 ft  
1
1
1
2
2
1
1
1
1
2
1
1
2
4
1
1
2
4
6 ft  
8 ft  
2
Lid Hinge  
Window Gasket  
Window Glass, 4.50” x 5.50” x .250”  
Ball End for Gas Spring  
Window Gasket  
Upper Window Bracket  
Gas Spring  
Lower Window Bracket  
Power Supply Barrier  
Grounding Clip  
Camera Sled  
Circuit Board  
57004106COMP  
570010002  
EH550010002  
EH47004046COMP  
EH110042  
57004008COMP  
EH470010005  
57004009COMP  
EH47004040COMP  
570010004  
EH55004100COMP  
PCB9000276ASSY  
EH450010256  
MF00-4700-019A  
EH550010045  
57294001COMP  
57234001COMP  
LK01-0104-0400  
LK01-0104-0400  
57291001WA  
57231001WA  
57004007COMP  
57004007COMP  
GS01-0002-0430  
GS01-0002-0430  
HF00-1300-3500  
57004005COMP  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
Circuit Board Insulator  
Power Supply Barrier Cover  
Foam Filter  
Enclosure Lid (EH5729 Series)  
Enclosure Lid (EH5723)  
Latch (EH5723 Series)  
Latch (EH5729 Series)  
Enclosure Body (EH5729 Series)  
Enclosure Body (EH5723 Series)  
Latch Bracket (EH5723 Series)  
Latch Bracket (EH5729)  
Gasket (EH5723 Series)  
Gasket (EH5729 Series)  
Gland  
25  
26  
27  
28  
29  
30  
1
Vent Grill  
A
B
16  
20  
9
13  
2
4
7
6
2
2
4
Internal Star Washer, #6 (EH5723 Series)  
Internal Star Washer, #6 (EH5729 Series)  
Screw, 6-32 x 3/8”, Pan Head, Phillips (EH5723 Series)  
Screw, 6-32 x 3/8”, Pan Head, Phillips (EH5729 Series)  
Screw, 6-32 x 5/8”, Flat Head, Phillips  
Hex Nut, 10-32  
ZH6LWSIS  
ZH6LWSIS  
ZH6-32X.375SPPG  
ZH6-32X.375SPPG  
ZH6-32X.625SFS  
ZH10-32NUTSH  
ZH6-32NUTSH  
ZH10-32X.375SPP  
ZH4-40X.250SPP  
ZH4LWSIS  
C
D
E
Hex Nut, 6-32  
F
Screw, 10-32 x 3/8”, Pan Head, Phillips  
Screw, 4-40 x 1/4”, Pan Head, Phillips  
Internal Star Washer, #4  
G
H
J
Internal Star Washer, #10  
ZH10LWSIS  
K
L
M
4
2
2
Nylon Washer  
Screw, 6-32 x 3/4”, Pan Head, Phillips  
Screw, 6-32 x 1/4”, Pan Head, Phillips  
ZH200X437X62N  
ZH6-32X.750SPP  
ZH6-32X.250SPP  
C1431SM-B (7/09)  
9
 
 
23  
20  
A
F
22  
19  
17  
K
E
18  
C
A
TO STUD INSERTS  
IN LID  
15  
16  
26  
21  
14  
13  
A
F
12  
TO UPPER WINDOW  
BRACKET NUTS  
G
24  
H
J
34  
L
11  
D
28  
29  
30  
33  
C
A
A
N
25  
10  
A
C
9
1
27  
32  
TO PCB  
A
C
6
8
7
31  
4
3
C
B
M
5
Figure 2. EH5700L Exploded Assembly Diagram  
10  
C1431SM-B (7/09)  
 
 
Table B. EH5700L Series Exploded Assembly Parts List  
Item  
Qty  
Description  
Part Number  
1
1
1
6 ft  
8 ft  
1
2
1
1
1
Body for 29-inch (73.66 cm) Enclosure  
Body for 23-inch (58.42 cm) Enclosure  
Gasket (not shown) (EH5723L Series)  
Gasket (not shown) (EH5729L Series)  
Cover, 26-pin “D” Connector  
Vent Cover Plate  
RediLINK Wire Assembly  
Gasket, Tilt Table Housing  
Tilt Table  
57291000WA  
57231000WA  
GS01-0002-0430  
GS01-0002-0430  
90010026  
57004000COMP  
WIRA220050  
GS05-0102-001A  
9004016COMP  
9554400COMP  
570010001  
2
3
4
5
6
7
8
9
1
2
Enclosure Cradle  
Vent Cover Gasket  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
2
1
1
1
2
1
1 ft  
1
2
1
1
1
1
4
4
1
2
4
1
1
2
4
2
1
1
1
2
2
1
Label  
LBLG10010  
ZH3091  
570010000  
57004004COMP  
125010001  
57004006COMP  
EH110042  
570010002  
Hole Plug, 3/8-inch Hard Nylon, Black  
Pivot Pin  
Body Hinge  
Stainless Steel Clip  
Lid Hinge  
Window Gasket  
Window Gasket  
Ball End for Gas Spring  
Window Glass  
Upper Window Bracket  
Lower Window Bracket  
Gas Spring  
Screw, 10-32 x 3/8”, Pan Head, Phillips  
Nylon Washer (not shown)  
Camera Sled  
Latch (EH5723L Series)  
Latch (EH5723L Series)  
Enclosure Lid (EH5729L Series)  
Enclosure Lid (EH5723L Series)  
Latch Bracket (EH5723L Series)  
Latch Bracket (EH5729L Series)  
Grounding Clip  
Circuit Board  
Circuit Board Insulator  
Vent Grill  
Foam Filter, (-1, -2, -3 only)  
Power Supply Barrier  
Power Supply Barrier Cover  
EH47004046COMP  
EH550010002  
57004008COMP  
57004009COMP  
EH470010005  
ZH10-32X.375GRY  
ZH200X437X62N  
EH55004100COMP  
LK01-0104-0400  
LK01-0104-0400  
57294001COMP  
57234001COMP  
57004007COMP  
57004007COMP  
570010004  
PCB9000276ASSY  
EH450010256  
57004005COMP  
EH550010045  
EH47004040COMP  
MF00-4700-019A  
24  
25  
26  
27  
28  
29  
30  
31  
32  
33  
34  
A
16  
20  
2
9
13  
2
4
7
2
2
Internal Star Washer, #6 (EH5723L Series)  
Internal Star Washer, #6 (EH5729L Series)  
Cap Screw, 10-32 x 1”, Allen Socket Head  
Screw, 6-32 x 3/8”, Pan Head, Phillips (EH5723L Series)  
Screw, 6-32 x 3/8”, Pan Head, Phillips (EH5729L Series)  
Screw, 6-32 x 5/8”, Flat Head, Phillips  
Hex Nut, 10-32  
ZH6LWSIS  
ZH6LWSIS  
B
C
ZH10-32X1.00CS  
ZH6-32X.375SPP  
ZH6-32X.375SPP  
ZH6-32X.625SFS  
ZH10-32NUTSH  
ZH6-32NUTSH  
ZH10-32X.375SPP  
ZH4-40X.375SPP  
ZH4LWS1S  
D
E
F
G
H
J
Hex Nut, 6-32  
Screw, 10-32 x 3/8”, Pan Head, Phillips  
Screw, 4-40 x 3/8”, Pan Head, Phillips  
Internal Star Washer, #4  
2
K
L
M
N
4
2
2
2
Internal Star Washer, #10  
ZH10LWSIS  
Screw, 6-32 x 3/4”, Pan Head, Phillips  
Screw, 1/4-20 x 1/2”, Pan Head, Phillips  
Screw, 6-32 x 1/4”, Pan Head, Phillips  
ZH6-32X.750SPP  
ZH1/420X.500SFS  
ZH6-32X.250SPP  
C1431SM-B (7/09)  
11  
 
 
B
11  
C
9
E
10  
B
C
B
A
8
B
12  
A
F
7
G
H
6
5
4
C
J
TO  
FAN  
3
RED  
22 GA. (1 FT.)  
K
BLACK  
22 GA. (1 FT.)  
TO PC BOARD  
2
SCREWS SUPPLIED  
WITH BLANKING PLATE  
1
Figure 3. Exploded Assembly Diagram for Blower and Circuit Board  
12  
C1431SM-B (7/09)  
 
 
Table C. Exploded Assembly Parts List for Blower and Cicuit Board  
Item  
Qty  
Description  
Part Number  
1
2
3
4
5
6
7
8
9
1
2
1
1
1
2
1
1
1
1
1
1
1
1
1
2
Vent Grill  
Foam Filter  
57004005COMP  
EH550010045  
PCB9000277ASSY  
EH450010256  
PCB9000276ASSY  
EH47004040COMP  
MF00-4700-019A  
WIR432000  
ED210015  
955105W3  
EH18013  
57004010COMP  
MF01-5701-010D  
570010007  
CN16-1820-0002  
CN16-5821-0101  
24VDC Fan Rectifier (for -2 ver. encl.)  
Circuit Board Insulator  
Circuit Board  
Power Supply Barrier  
Power Supply Barrier Cover  
Fan Wire Cord with Plug (-1, -3 models only)  
Fan Tube, 230 VAC  
Fan, 24 VDC  
Fan Tube, 120 VAC  
Fan Plate (EH5723L/EH5729L Series)  
Fan Plate (EH5723/EH5729 Series)  
Standoff, 3.375” Length  
Connector Plug  
10  
11  
12  
Connector Sockets  
A
B
C
E
3
8
2
4
3
2
2
2
1
1
Cap Screw, 6-32 x 3/8”, Allen Socket Head  
Internal Tooth Lock Washer, #6  
Flat Washer, #6  
Cap Screw, 6-32 x 3/8”, Allen Socket Head (for -1/-3 ver. encl.)  
Cap Screw, 6-32 x 3/8”, Allen Socket Head (for -2 ver. encl.)  
Screw, 4-40 x 3/8”, Pan Head, Phillips  
Internal Tooth Lock Washer, #4  
Circuit Board Grounding Clip  
Cap Screw, 6-32 x 1/2”, Allen Socket Head (for -2 ver. encl.)  
Nylon Spacer (for -2 ver. encl.)  
ZH6-32X.375CS  
ZH6LWSIS  
ZH148X375X32  
ZH6-32X.375CS  
ZH6-32X.375CS  
ZH4-40X.375SPP  
ZH4LWSIS  
570010004  
ZH6-32X.500CS  
ZH131X361X62N  
F
G
H
J
K
C1431SM-B (7/09)  
13  
 
 
C
2
TO PCB  
3
E
F
B
1
A
G
B
4
5
D
6
7
Figure 4. Exploded Assembly Diagram for Heaters and Circuit Board  
14  
C1431SM-B (7/09)  
 
 
Table D. Exploded Assembly Parts List for Heaters and Circuit Board  
Item  
Qty  
Description  
Part Number  
1
2
1
2
2
2
1
4
1
2
1
1
Bracket/Heater Sink  
Heater, 230 VAC  
Heater, 24 VAC  
Heater, 120 VAC  
Connector Plug  
Connector Sockets  
Power Supply Barrier Cover  
Power Supply Barrier  
Circuit Board  
57004020COMP  
HTR40220  
HTR20024  
HTR50120  
3
CN16-1820-0004  
CN16-5821-0101  
MF00-4700-019A  
EH47004040COMP  
PCB9000276ASSY  
EH450010256  
4
5
6
7
Circuit Board Insulator  
A
B
2
6
2
4
2
2
2
2
Spacer, .500” Length  
SPA8423  
ZH4LWSIS  
ZH4LWSIS  
ZH4-40X.250SPP  
570010004  
ZH6-32X.250SPP  
ZH6LWSIS  
ZH4-40X.375SPP  
Internal Tooth Lock Washer, #4  
Internal Tooth Lock Washer, #4  
Screw 4-40 x 1/4”, Pan Head, Phillips  
Grounding Clip  
Screw, 6-32 x 1/4”, Pan Head, Phillips  
Internal Star Washer, #6  
C
D
E
F
G
Screw, 6-3 x 3/8”, Pan Head, Phillips  
C1431SM-B (7/09)  
15